Toshiba D-R3 - Manual (Page 28)

English - 27
6 Press the
†…
buttons to select a PR
(program) you wish to edit, delete, or
swap. And then press OK button.
7 Select Edit, Delete, or Swap.
• In case of Edit : you can add or edit PR(program)
- CH : Tune the channel using œ √ buttons or number
buttons.
- MFT : You can tune up the channel frequency better
using œ √ buttons.
- Name : Display station name automatically detected in
broadcasting signal. If not detected, you can
edit name by using
†…œ √ buttons.
• In case of Delete : the channel information of selected
PR(program) will be removed.
• In case of Swap : You can swap the channel
information of two PR(program). For example, if you
wish to swap PR2 and PR5, select swap at PR2, then
press OK button or
√ button at PR5.
You can add preset channel that Auto Channel Search
missed. And you can delete a channel you wish to
remove.
1 With the unit in Stop mode, press the
MENU button on the remote.
2 Using the
†…
buttons, move the
selection bar to “Setup” then press OK
button to select.
3 Using the
†…
buttons, move the
selection bar to “System” then press OK
button to select.
4 Using the †… buttons, move the
selection bar to “Install”, then press OK
button to select.
5 Move the selection bar to “Manual
Setup”, then press OK button to select.
Manual Setup
RETURN OK MOVE EXIT
Setup DVD-RAM(VR)
System √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
RETURN OK MOVE EXIT
System DVD-RAM(VR)
Clock Set √ √
Install √ √
CM Skip Time : 15 Sec √ √
AV1 Output : Video √ √
NICAM : On √ √
RETURN OK MOVE EXIT
Install DVD-RAM(VR)
Auto Setup √ √
Manual Setup √ √
RETURN OK MOVE EXIT
Manual Setup DVD-RAM(VR)
01 5 ---- √√
02 --- ---- √√
03 --- ---- √√
04 --- ---- √√
05 --- ---- √√
06 --- ---- √√
07 --- ---- √√
PR CH Name Edit
Edit
Delete
Swap
S
ystem Setup
MOVE OK
Manual Setup
Done
PR 01
CH - - -
Name - - - -
MFT
00566A-D-R3_14~35 8/31/04 10:28 AM Page 27