Toshiba D-R3 - Manual (Page 38)

English - 37
R
ecording
To pause recording
Press the REC PAUSE button to pause a recording in
progress.
● Press the REC PAUSE button again to resume
recording.
● You can switch channels by pressing the PROG
( / ) buttons while recording pauses.
To stop recording
Press the STOP ( ) button to stop or finish a
recording in progress.
● When using DVD-RAM/DVD-RW/DVD-R discs, the
message ‘Updating the information of disc.
Please wait for a moment’ is displayed.
3 Press the PROG ( / ) or number
( ~ ) buttons to select the current
program you want to record.
4 Press the REC MODE button repeatedly,
(or Press the REC MODE button and
then press the
…†
button) to select the
recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
5 Press the REC button.
Information concerning the channel is displayed on
the screen and then recording begins.
To view the current status of the disc and progress of
recording : Press the DISPLAY button, and the
information about the disc will appear.
Press the DISPLAY button once again.
Then you can check the information about the title
under recording.
Record Mode SP
Recording : PR 1 [Mono]
■ You can not change the recording mode
and the PROG while recording.
■ Recording will stop automatically if there
is no free space left for recording.
■ Up to 99 titles can be recorded onto a
disc.
■ Recording will stop automatically if a copy
protected image is selected.
■ DVD-RAM/DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
■ Do not use DVD-R authoring discs with
this unit.
NOTE
DVD-RAM(VR) Disc Info
Disc Name
Total Title 15
Total Playlist 2
Recordable Time 03:00 SP
Protection Not Protected
Main Screen Recording: PR 1 [Mono]
PIP Screen - -
24 APR 2004 SAT 12:00
DVD-RAM(VR) Recording Info
Name 04/APR/2004 12:00
Recording Title 15
Created Time 04/APR/2004 12:00
Recording Time 00:02:05
24 APR 2004 SAT 12:00
00566A-D-R3_36~46 8/31/04 10:29 AM Page 37