Toshiba D-R3 - Manual (Page 26)

English - 25
This menu is used to set the current time.
You need to set the time to use timer recording.
1 With the unit in Stop mode, press the
MENU button.
2 Using the
†…
buttons, move the
selection bar to “Setup” then press OK
button to select.
3 Select “System” the
†…
buttons, then
press the
√
or OK button.
4 Select “Clock Set” using the
†…
buttons, then press the
√
or OK button.
5 Use navigation
†…œ √
buttons to input
Time, Date, Year. Use number button to
input clock data directly.
Clock Set
RETURN OK MOVE EXIT
Setup DVD-RAM(VR)
System √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
RETURN OK MOVE EXIT
System DVD-RAM(VR)
System √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
RETURN OK MOVE EXIT
System DVD-RAM(VR)
Clock Set √ √
Install √ √
CM Skip Time : 15 Sec √ √
AV1 Output : Video √ √
NICAM : On √ √
S
ystem Setup
6 Set Auto clock tap “On” or “Off” using
the
…†
buttons.
7 Press OK button, then the date and time
will be saved.
If you don’t press OK button, it will not be saved.
RETURN OK MOVE EXIT
Clock Set DVD-RAM(VR)
Time Date Year
00
Auto Clock :
: THU 01 2004 JAN 12
Off
■ You must have the antenna connected to
set the Auto Clock.
See page 15 Connections.
■ Auto Clock : The recorder sets the clock
automatically by searching for a channel
that carries a time signal.
NOTE
00566A-D-R3_14~35 8/31/04 10:28 AM Page 25