Toshiba D-R3 - Manual (Page 42)

English - 41
R
ecording
5 Set timer recording option.
• The Timer Recording screen is displayed.
Fill the input items using the arrow buttons and
number buttons.
œ √ : Moves to the previous/next item,
…† : Sets a value.
• Source : The video input source (AV1, AV2, AV3
AV4 or DV), or the broadcasting
channel you want to make a timer
recording from.
• Date : Set the recording day. (day/month)
• Start/End Time : Start and end time of the timer
recording.
• Type (Recording cycle).
Once : Records once.
Weekly : Records at a set time every week.
Daily : Records at a set time every day.
• V/P : VPS(Video Programme System) or
PDC(Programme Delivery Control) function.
- If you set this function on, you can control the
starting and ending time of recording by special
signal included in the broadcasting signal.
If a TV programme is shortened or starts earlier or
later than scheduled, this function synchronizes
the starting and ending time of recording with the
actual broadcasting time automatically.
- Set up the start-time EXACTLY according to the
published TV schedule. Otherwise the timer
recording will not take place.
- Do not select PDC or VPS unless you are sure
the programme you wish to record is broadcast
with PDC or VPS.
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
Make sure the Clock has been set (Setup - System
Setting) before you proceed with a timer recording.
1 Press the MENU button.
2 Press the
†…
buttons to select
“Programme” and then press the OK or
√
button.
3 Press the
†…
buttons to select
“Standard Timer” and then press the OK
or
√
button.
4 Press the
†…
buttons to select
“Scheduled Record List”, and then
press the OK or
√ button.
Making a Standard Timer
Before you start
RETURN OK MOVE EXIT
Scheduled Record List DVD-RAM(VR)
01 -- -- --- -- --:-- --:-- -- -- -- √√
No. Source Date Start End Type Mode V/P Edit
Remaining Recording Time 02:12 SP
Scheduled Record List DVD-RAM(VR)
01 PR 01 01/ 01 12:00 14:00 Once SP Off √√
02 -- -- --- -- --:-- --:-- -- -- -- √√
No. Source Date Start End Type Mode V/P Edit
Remaining Recording Time 02:12 SP
No. 01
Source PR 01 Date 01 JAN
Start 12 : 00 End 14 : 00
Type Once Mode SP
V/P Off
Mode (Recording Mode)
- FR : Select when you want to set video quality
automatically. It depends on the remaining time on
the DVD.
- XP (high quality) : Select when video quality is important.
(Approx. 1 hour)
- SP (standard quality) : Select to record in standard
quality. (Approx. 2 hours)
- LP (low quality) : Select when a long recording time is
required.(Approx. 4 hours)
- EP (extended mode) : Select when a longer recording
time is required. (Approx.6 hours
about 1.2 Mbps)
RETURN OK MOVE EXIT
RETURN OK MOVE EXIT
Programme DVD-RAM(VR)
Video Plus+ Record √ √
Standard Timer √ √
Video Plus+ Record Extended : Off √ √
00566A-D-R3_36~46 8/31/04 10:29 AM Page 41