Toshiba D-R3 - Manual (Page 19)

Method 2 : Connecting to a
stereo amplifier with analogue
output jacks
If your stereo amplifier only has audio input jacks
(L and R), use the analogue audio out jacks.
18 - English
There are several ways to output audio signal not using
scart cables. Select the audio connection that best suits
you below.
● Method 1 : Connecting to your TV
● Method 2 : Connecting to a stereo amplifier
(analogue audio out / digital audio out)
● Method 3 : Connecting to an AV amplifier with a
digital output jack
Method 1 : Connecting to your
TV
This connection will use your TV’s speakers.
Step 4 : Other type of
connecting the Audio
output cable
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
C
onnecting & Setting UP
00566A-D-R3_14~35 8/31/04 10:28 AM Page 18