Step 1: unpacking, Step 2: connecting scart cable, Accessory – Toshiba D-R3 User Manual

Page 16

Advertising
background image

English -

15

Step 1: Unpacking

Accessory

Check for the supplied accessories below.

There are several ways to connect your DVD Recorder
using scart cables.
Select one of the following connections that best suits you.

●

Method 1 : Antenna + DVD Recorder + TV

●

Method 2 : Antenna + VCR/satellite receiver/cable

box + DVD Recorder + TV

Step 2: Connecting SCART
Cable

C

onnecting & Setting UP

■

If you are using an off-air antenna that
has 300-ohm twin flat leads, use an
external antenna connector (300-75 ohm
adaptor : not supplied) to connect the
antenna to the DVD Recorder.

■

If you have two separate antennas (one
VHF and the other UHF), use a UHF/VHF
combiner-adaptor (available at most
electronics shops) to connect the antenna
to the DVD Recorder.

■

The VHF/UHF RF OUT jack of this
product sends only signals received
through the antenna. It does not output
Audio/ video signals. You must connect
audio/video cables to view Video from the
unit. (i.e. DVD playback)

NOTE

Video/Audio Cable

RF Cable for TV

Batteries for Remote

Control (AAA Size)

Remote Control

Instruction Manual

00566A-D-R3_14~35 8/31/04 10:28 AM Page 15

Advertising