Toshiba TEC MA-1450-1 SERIES - Manual (Page 116)

6. PROGRAMMING OPERATIONS EO1-11095
6-11
For Address 2: Cashier Status
2 [ST] |Cashier Status| [#]
For Address 1: Cashier Name
1 [ST] Character Entries [ST]
6.7 CASHIER CODE AND NAME PROGRAMMING (Submode 2)
Programming
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
2 [@/FOR] |Cashier Code| [NS]
6.7 CASHIER CODE AND NAME PROGRAMMING (Submode 2)
. . .
Submode
No.
(See NOTE 1 below.)
(max.12 characters)
0: Cashier for Sale Entries
1: Cashier for Training Entries
......
......
[AT/TL]
NOTES: 1. The following table shows the Cashier Codes that can be entered. (The capacity is determined
by the RAM Allocation Setting.) However, the actual maximum number of the cashiers are
preprogrammed. Therefore, ask your TOSHIBA TEC representative for further information.
For sequentially programming the
address, the Address number
specification can be skipped.
Code Entry Type 1 to 10
Cashier Push-stay 1 to 4, 99*
Key Type [CLK] key 1 to 8, 99*
* The Cashier Code 99 for the Cashier Key Type is fixed as a code of a cashier for Training Entries.
2. For the name of each cashier, a maximum of 12 regular-sized or 6 double-sized characters can
be entered. A combination of both types is also available. (At least one character must be
entered here.)
Repeat for
another
Cashier.