Toshiba TEC MA-1450-1 SERIES User Manual

Page 141

Advertising
background image

6. PROGRAMMING OPERATIONS

EO1-11095

6-36

6.21 PRESET RATE SETTING FOR SELECTIVE ITEMIZERS (SI1 and SI2)

TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437

Open 8:00am to 7:00pm
Closed: every Wednesday

12-19-1994 MON #1

P00

%- 5%

0038

TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437

Open 8:00am to 7:00pm
Closed: every Wednesday

12-19-1994 MON #1

P00

%+ 10%

0037

ex.) To set 10% on [%+] Key:

Mode Lock: SET, enter 10, depress [%+].

ex.) To set 5% on [%-] Key:

Mode Lock: SET, enter 5, depress [%-].

To reset the rate once set:

Enter 0, depress the required % key.
(Then the % key will always require a manual rate
entry in sale entries.)

NOTE:

When two [%+] keys or two [%-] keys are
installed on the keyboard, two different % rates
(one for each) may be preset, in the same
manner as described above. The two rates
may be the same or different from the other.
Or only one key may be preset with a rate and
other may remain non-preset.

......

......

6.21

PRESET RATE SETTING FOR SELECTIVE ITEMIZERS (SI1 and SI2)

If any of [ST1/TL] (or [SI/TL]) and [SI2/TL] keys are installed on the keyboard, a preset rate may be programmed
on each key.
As for the functions and applications of the Selective Itemizers, refer to the description below.

CONDITION

Any time outside a sale

OPERATION

Mode Lock: SET

|Preset Rate of SI 1|

[SI1/TL] (or [SI/TL])

(0,001 to 99,999 (%);
use the [ . ] key if a decimal portion is contained.)

|Preset Rate of SI 2|

[SI2/TL]

TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437

Open 8:00am to 7:00pm
Closed: every Wednesday

12-19-1994 MON #1

P00

SI1TL 7%

0043

ex.) To set 7% as SI 1 preset % rate:

Mode Lock: SET

7 [ST1/TL]

NOTES:

1. Whether the calculated amount by the

preset SI % rate affects (i.e. add to or
subtract from) the sale total is
determined by a program option.

2. To reset the rate once set, enter 0 as

the rate. (Then the rate is regarded as
100% if the option “Non-affect” is
selected. With the option “SI Affects
Sale Total”, some rate other than “0”
should be programmed.)

Advertising
This manual is related to the following products: