Toshiba TEC MA-1450-1 SERIES - Manual (Page 92)

5. READ (X) AND RESET (Z) REPORTS EO1-11095
5-3
5. READ (X) AND RESET (Z) REPORTS
GT Reports -- to be taken on weekly or monthly basis --
(The Mode Lock position is the same as the corresponding Daily report.
However, always add 200 to the numeric value for the report taking.)
FINANCIAL GT READ AND RESET 5-16
• Financial GT Read X
• Financial GT Reset Z
CASHIER GT READ AND RESET 5-16
• All Cashier GT Read X
• All Cashier GT Reset Z
• Individual Cashier GT Read X Code Entry Method:
• Individual Cashier GT Reset Z 204 [#] |Cashier ID Code| [AT/TL]
(2-digit manager-assign code)
Cashier Key Method:
Set the required Cashier Key (or
depress the required Cashier Key),
then 204 [#] [AT/TL]
CREDIT CARD COMPANY SALES GT READ 5-16
AND RESET
• Credit Card Company Sales GT Read X
• Credit Card Company Sales GT Reset Z
DEPARTMENT GROUP GT READ X 208 [AT/TL] 5-16
DEPARTMENT GT READ AND RESET 5-16
• Individual Department GT Read X 211 [#], then depress the required Dept.
Keys (or use [DP#] key), one by one,
[ST] may be used to obtain subtotal,
[AT/TL] to end.
• All Department GT Read X
• All Department GT Reset Z
PLU READ AND RESET * 5-16
• Individual PLU GT Read X 213 [#] |PLU Code| [PLU] ([ST])
[AT/TL]
* (May be replaced by
[PLU Preset-code Key])
• Zone PLU GT Read X 213 [#] Zone-start [@/FOR] Zone-end [AT/TL]
• Zone PLU GT Reset Z PLU Code PLU Code |
• All PLU GT Read X
• All PLU GT Reset Z
• Inactive PLU GT Read X 213 [#] 0 [AT/TL]
PLU GROUP SALES GT READ AND RESET 5-16
• PLU Group Sales GT Read X
• PLU Group Sales GT Reset Z
Report Name Mode Key Operation SAMPLE
Lock PAGE
203 [AT/TL] (Drawer opens.)
204 [AT/TL] (Drawer opens.)
206 [AT/TL]
211 [AT/TL]
213 [AT/TL]
224 [AT/TL]
Repeatable