Telos Zephyr Xstream User Manual

Page 20

Advertising
background image

USER’S MANUAL

Section 1: QUICK RESULTS

8

• If you have Euro‐ISDN (or another service that does not have SPIDs), 

press the < TEL > button (located beneath the LCD display) three (3) 
times and skip to step 5

• If you have SPIDs, press the < TEL > button two  (2) times and continue. 

You should see a screen that looks like this: 

 

2. Make sure the dark cursor bar is highlighting the line labeled “SPID 1”. Press 

the <SEL> button once and then enter the SPID of your first B channel, using 
the dial pad on the front right panel. (Note that there are no hyphens, 
punctuation, or blank spaces in SPIDs; they are one continuous number.) 
The <

5> button can be used to back up (move the cursor to the left) to 

delete characters for editing (or to erase an existing entry). Then press the 
<SEL> button to store it. 

3. Press the < 

6 > button to highlight the line labeled “SPID 2 ”. Press the 

<SEL> button once and then enter the SPID of your second B channel using 
the dial pad on the front right panel, as above. Then press the <SEL> button 
to store it.  

4. You now have two options: 

• If your ISDN does not require Directory Numbers (DN) press <TEL> one 

(1) time and skip to step 5. 

• If your ISDN requires Directory Numbers (DNs), and most users in the 

USA & Canada will, press the <

6> button to move the dark cursor to 

the line labeled "DN/MSN 1".  

Press the <SEL> button once and then enter the DN (the 7 digit 
telephone number) of your first B channel using the dial pad on the 
front right panel. (Note that there are no hyphens, punctuation, or 
blank spaces in DNs or MSNs; they are one continuous number.) The 
<

5> button can be used to back up (move the cursor to the left) and 

delete characters or erase and existing entry. Press the <SEL> button to 
store it. 

Press the <

6> button to move the dark cursor to the line labeled 

"DN/MSN2". Press the <SEL> button once and then enter the DN or 
MSN of your second B channel using the dial pad on the front right 
panel. Press the <SEL> button to store it. 

Press the <TEL> button once.  You will see a screen like this: 

Advertising