Telos Zephyr Xstream - Manual (Page 83)

USER’S MANUAL
Section 4: BASIC OPERATION & INSTALLATION 71
5. Press <SEL> to continue or press < 5> and then <SEL> to escape without
changing.
6. Enter a name (see the beginning of this chapter section for an example on
how to select and enter information).
7. Enter one or two phone numbers, as required for transmit and receive
modes to be used when communicating with this site.
8. For each phone number entered, select a call type. This would be Zephyr if
calling an ISDN codec, Phone if placing a call to a telephone, or Xport if
dialing a Zephyr Xport.
9. You can choose whether to Include Codec settings or not by selecting this
menu selection. The choices are Number (no codec information included
with this dial setup) or Number & Codec.
If Number & Codec is selected the system will include the current settings in
the CODEC Menu with this setup. Each time this setup is activated, the
system will reset the CODEC Menu items to these setting before dialing the
number(s) for this setup.
10. Move the cursor to the word Save and then press <SEL> to complete the
entry process.
h
HOT TIP!
You can use a Dial Setup to easily configure your Zephyr Xstream for inbound calls. To do
so, just leave the Number 1 & Number 2 fields empty and set Include to "Number & Codec".
When this dial setup is activated, the Xstream will change CODEC Menu settings to the
settings present when this dial setup was created.