Telos Zephyr Xstream - Manual (Page 251)

USER’S MANUAL
Section 11: THE WORKS – Detailed Menu Reference 239
11.7 Special Menus: Auto, Dial, & Drop
Step by step instructions on using these keys are located in Section 4.2. In this section we will
go into additional details about the DIAL menu and will present advanced information about
how the Dial Setups work under special circumstances.
The DIAL menu
The DIAL menu appears after the Dial button has been pressed and looks like the following:
If you wish to dial a data call to another ISDN codec (Mode = Zephyr) you can simply enter the
desired number and press <DIAL> again. A second call can be placed on "Line 2" by pressing
<DIAL> a third time.
Pressing <DIAL> twice, without entering a number, will connect to the last number dialed on
that line, in the same Mode used for the previous call, making it easy to reconnect if accidentally
disconnected.
To drop all calls in progress, simply press <DROP> four times. This sequence is illustrated here.
Ready
Ready
DIAL
Phone #
DIAL
DROP
Four Times
Connected: 0:00
Connected: 0:00