Tiger Products Co., Ltd JD 5065 / 5085 - 5105M - Manual (Page 57)

OPERATION
SIDE ROTARY Operation Section 3-3
© 2012 Alamo Group Inc.
OPERA
TION
1. STANDARD EQUIPMENT AND SPECIFICATIONS
SIDE ROTARY
Cutting Width 60” and 72” Actual Cut
Spindle Drive Direct Spline and Direct Flexible Coupler
Cutter Assembly One-piece formed dish type with one-piece forged spindle assembly
Cutter Head Arc 180° on Cable Lift and 159° on Combo Draft Beam
Knives Two full swinging high suction heat treated knives standard
Optional three, four or six knives available
Main Frame *Solid mount design may include front, mid and rear braces
(May vary depending on tractor model)
Lift Control Tractor Hydraulic or Optional Cable control and valves
* May vary depending on tractor model.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
(SGM-14)