Tiger Products Co., Ltd JD 5065 / 5085 - 5105M - Manual (Page 88)

OPERATION
SIDE ROTARY Operation Section 3-34
© 2012 Alamo Group Inc.
OPERA
T
ION
Never stand or allow another person to stand between a running tractor and the mower
when disconnecting the implement from the tractor.
9.4 Shutting Down the Implement
To shut down attached mower head, first bring the
tractor to a complete stop. Decrease engine RPM
to idle then disengage cutterhead. The mower head
will come to a complete stop within a suitable
amount of time. Do not engage or disengage the
cutterheads at a high RPM unless there is an
emergency situation.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, lower the attached implement to the
ground, shut down the engine, remove the key, and
wait for all motion to come to a complete stop
before exiting the tractor. OPS-U- 0016
BEFORE leaving the tractor seat, always set the parking brake and/or set
the tractor transmission in parking gear, disengage the PTO, stop the
engine, remove the key, and wait for all moving parts to stop. Place the
tractor shift lever into a low range or parking gear to prevent the tractor
from rolling. Never dismount a Tractor that is moving or while the engine
is running. Operate the Tractor controls from the tractor seat only.
(SG-9)
10. DISCONNECTING THE MOWER FROM THE TRACTOR
Before disconnecting the mower, the mower must be disengaged and blade rotation at a complete stop.
Move the mower to a level storage location and place the mower head on the ground. If the mower is not
resting securely on the ground, block the mower up securely before attempting to disconnect it from the
tractor.
Use extreme care to keep feet and hands from under the mower and clear of any pinch points. OPS-R-213