Tiger Products Co., Ltd JD 5065 / 5085 - 5105M - Manual (Page 72)

OPERATION
SIDE ROTARY Operation Section 3-18
© 2012 Alamo Group Inc.
OPERA
T
ION
Side Rotary Mower PRE-OPERATION Inspection
Mower ID#________________ Make ____________________
Date: ________________ Shift ____________________
Before conducting the inspection, make sure the tractor engine is off, all rotation
has stopped and the tractor is in park with the parking brake engaged. Make sure
the mower is resting on the ground or securely blocked up and all hydraulic
pressure has been relieved.
Operator’s Signature:
Table 1:
Item
Condition at
Start of Shift
Specific Comments if
not O.K.
The Operator’s Manual is in the tractor
All safety decals are in place and legible
The hydraulic cylinders pins are tight
There are no leaking or damaged hoses
The mower deck is clear of cut grass and debris
Chain guards/deflectors are in place & in good
Blade carrier retaining nut is tight
Blades are not chipped, cracked or bent
Blade bolts are tight
Wheel lug nuts are tight
Transport locks are in good condition
DO NOT OPERATE an UNSAFE TRACTOR or MOWER