Connecting to the switch – UNICOM Electric GST-2402 User Manual
Page 16
Advertising
Print Server
Server
Uplink to backbone switch
10/100Mbps port
Giga port
Figure 3-2. Department Bridge Application
Connecting to the Switch
The Console port is a female DB-9 connector that enables a connection to a
PC or terminal for monitoring and configuring the Switch. Use the supplied
RS-232 cable to connect a terminal or PC to the Console port.
The Console configuration (out of band) allows you to set the Switch for
"remote terminal" as if the console terminal were directly connected to it.
Advertising