UNICOM Electric GST-2402 - Manual (Page 25)

name is "Switch-A".
Broadcast Storm Filtering Control: enter “3” to change the value.
Load Factory Default Setting: enter “1” to set the switch configuration
value to default value.
System interface
VLAN Member Setup
Configuring Port-Base VLAN group.
Add VLAN Group
1. Enter “E” to switch to Edit Mode.
2. Press “A” to start adding a VLAN group.
3. Use “L” and “J” to move to the port that you want to add into a VLAN
group and use “space” key to mark the port.
4. When finished selecting VLAN members, press “ U” to update the VLAN
table.
5. The VLAN group list will be displayed.