Trunk configuration – UNICOM Electric GST-2402 User Manual
Page 21
Advertising
Port configuration interface
Enable: enabling or disabling this port.
Speed advertisement: select speed and duplex mode of port.
Flow Control: enabling or disabling the Flow Control function.
Rx Bandwidth: set up the receive bandwidth.
Tx Bandwidth: set up the transceiver bandwidth.
[Note] You must to enable the Flow control for Rx/Tx bandwidth to work.
Trunk Configuration
It supports 8-trunk groups as follows:
Trunk1
Port 1, 2
Trunk 2
Port 3, 4
Trunk 3
Port 5, 6, 7, 8
Trunk 4
Port 9, 10, 11, 12
Trunk 5
Port 13, 14, 15, 16
Trunk 6
Port 17, 18, 19, 20
Trunk 7
Port 21, 22, 23, 24
Trunk 8
Port 25, 26
All trunk groups default to disabled status. Use the “Space” key to change the
Advertising