Ultra electronic Prima 3 - Manual (Page 11)

11
(to the next page)
Connecting the IC unit
(sold separately)
Medium-type and compact size IC units are sold
separately, as are specialized optional devices for the
printer. Consult your dealer for more details.
WARNING
•
Make sure that the power switch is turned
OFF and the AC cable is detached from
the plug, before connecting and
disconnecting the IC units. Otherwise
electric shocks, fires or malfunction of the
product may occur.
•
Using IC units other than those specified
may cause electric shocks, fires or
malfunction of the product.
Electric
shock
Set-up
Medium-type IC unit and Compact IC unit (sold separately)
Please ask your dealer for the Compact IC unit
connection.
Connect the compact IC unit to the host computer with
the interface cables which are commercially available.
The medium-type IC unit has various type of interface
cable, according to installed IC unit. Consult your dealer
for more details.
Interface cable
(Commercial item)
Medium-type IC unit and
Compact IC unit
1.
Set up the unit joint plate which comes with the
laminator (optional). Mount the printer on to joint
plate.
FRONT
FRONT
X IDie
printer
Joint Plate
The laminator is sold separately, as a specialized
optional device for the printer. Consult your dealer for
more details.
WARNING
•
Make sure that the power switch is turned
OFF and the AC cable is detached from
the plug, before connecting and
disconnecting the laminator. Otherwise
electric shocks, fires or malfunction of the
product may occur.
•
Using laminator other than those specified
may cause electric shocks, fires or
malfunction of the product.
Connecting the Laminator
Electric
shock