Ultra electronic Prima 3 - Manual (Page 31)

31
(to the next page)
Clearing the free counter
Reset the free counter.
The [Total] counter and [Head] counter cannot be reset.
Cleaning mode
The printer is provided with an operation mode for
cleaning the card feed roller and the magnetic head to
keep the printer in the best condition.
See p.42,43 and p.44 for executing the cleaning mode.
> C o u n t e r R e s e t
O K ?
EXIT
ENTER
Exit user
mode.
Press to reset.
(The electronic beep
sounds .The beep
will not sound if the
buzzer mode setting
is set to off.)
To check that the counter is reset to zero, select “Free
Counter” in “Setting the counter type” on p.29.
CAUTION
The head counter is cleared to zero
each time the thermal head is replaced.
> C l e a n i n g >
> > R o l l e r s
O K ?
> > M G H e a d
O K ?
ENTER
ENTER
ENTER
ENTER
Execution
(The electronic
beep sounds.
The beep will
not sound if the
buzzer mode
setting is set to off.)
Select the cleaning item with and press for execution.
(The electronic beep sounds .
The beep will not sound if the
buzzer mode setting is set to off.)
To exit the cleaning mode, turn off the power after
cleaning.