Protective screen film, First operation of the unitech pa962, Pressing the on/off key – Unitech PA962 User Manual
Page 11: Adjusting screen contrast, Calibrating the pa962, Setting time zone, date, and time
11
Product Reference Guide
First Operation of the Unitech PA962
Pressing the ON/OFF Key
The Unitech PA962 welcome screen appears. The
Windows CE
®
screen will appear shortly thereafter.
Adjusting Screen Brightness
Press [FUNC] key and Cursor key to decrease
or increase screen brightness.
Calibrating the PA962
The PA962 will prompt you to calibrate the unit by
tapping a sequence of screen locations. Tap
gently but firmly. When you have completed the
series of taps, press the [ENT] key to confirm it or
press the [ESC] key to cancel it.
This screen will automatically appear when the
unit is powered-on for the first time or after the
system is reset. This screen can also be ac-
cessed at any time by pressing the hot key
[FUNC] and the [ESC] key.
Setting Time Zone, Date, and Time
After Calibrating the PA962, the “Date/Time Prop-
erties” dialog box will appear. Follow the steps
below to set the date and time.
Protective Screen Film
The PA962 screen ships with a protective plastic film. You may remove this if
desired by peeling from one corner. The screen will be more susceptible to
scratching without the film, but will be more readable.
וֹ כּ מּף
ףץ٪ّ ٠מּَ ِ ٩٭۶ףוֹ ٭٩ץף ێ ۖ ף