Unitech PA962 - Manual (Page 8)

8
Unitech PA962
First Steps with the Unitech PA962
There are three ways to provide power to the PA962:
NOTE: Data you enter may not be properly stored until the built-in backup battery
has been adequately charged. Please be remided to turn on the back up battery
before you charge the terminal.
Installing the Battery Pack
Remove the battery compartment door
(located on the lower back side of the
unit).
Position the battery pack with the label side towards you,
and the battery pack strap towards the bottom of the unit.
Insert and fully seat the battery pack, making sure the
shape of the battery pack fits the shape of the battery
compartment.
Docking Station =
RS232/Charging cable or USB/Charging cable =
Rechargeable Lithium-Ion battery pack =
1.
2.