Unitech PA962 - Manual (Page 37)

37
Product Reference Guide
To send your message, tap File and Send. Messages are placed in your OutBox
folder on the PA962 and will be delivered to their destination in one of two ways:
Sending Messages
To compose a new message, tap the New Message button on the command bar.
Enter an e-mail address in the To field or select a name from the Address Book.
All e-mail addresses entered in the e-mail fields in Contacts appear in the Address
Book.
=
They are transmitted to your mail server the next time you connect remotely.
In InBox, make sure the appropriate service is selected on the Service menu.
Then tap Connect.
=
They are transferred to the OutBox folder in Exchange or Outlook on your
desktop computer the next time you synchronize.
RF Communication
Windows CE can support TCP/IP protocol, so the user can easily connect to the
Internet by Modem or RF. The following chapter is an introduction on how to
connect the PA962 to a network via TCP/IP.
There are several PCMCIA RF cards available on the market. These cards
provide the PA962 with wireless communications. Currently, Unitech provides
Cisco 350, Agere (Lucent OEM 802.11b card) support for the PA962 with the
drivers pre-installed. By selecting a supported card for the PA962 RF communi-
cation will be “plug-and-play”.
RF networks look and operate similarly to Ethernet networks. The only differ-
ence is that a radio transmission replaces the hard-wire connection between
the various nodes. This means all of your existing applications that currently
operate over Ethernet will also function utilizing WLAN without any special
wireless network software. This picture illustrates a typical network topology
including the PA962 with RF.
WMS Database
Hub
WMS Database
Hub
וֹ כּ מּף ףץ٪ّ ٠מּَ ِ ٩٭۶ףוֹ ٭٩ץף ێ ۖ ףףףףף ףףףףף wwwِpdffactoryِcom