Unitech PA962 - Manual (Page 14)

14 Unitech PA962
Chapter 2. Using the Keypad and Scanner
Keypad
The PA962 series keypad contains 19 keys, including Cursor key, 0~9, Alpha key,
ON/OFF, Function, Escape, Backspace, and Enter key. Please refer to the
picture below.
[ENT]
The Enter key is used to initiate a process or confirm a selection
made by the user.
[TAB]
The Tab key is used to toggle between data fields or to place the
cursor at pre-determined places in a programming or word pro-
cessing application.
[FUNC]
The Function key is used to perform alternative key functions.
[ Back space]
The Backspace key is used to erase previously input characters.
[ESC]
The Escape key will perform the same function as tapping the
CANCEL button or the X button on the touch screen.
ON/OFF
When the unit is off, pressing the On/OFF key will turn the unit on.
Alternatively, when the unit is on, this key must be pressed and
held down for about two seconds in order to turn the unit off.
[Alpha]
This Alpha key is used to toggle between Numberic & Alpha Mode.
This Apha key is also used to toggle CAPS at Alpha Mode.
Backspace
Power On/Off
TAB
Function
[Cursor]
This Cursor key is used to navigate among applications.
Alpha
Cursor
וֹ כּ מּף ףץ٪ّ ٠מּَ ِ ٩٭۶ףוֹ ٭٩ץף ێ ۖ ףףףﺒ ףףףףףףף wwwِpdffactoryِcom