Unitech PA962 - Manual (Page 9)

9
Product Reference Guide
Or place the PA962 into the Docking
Station (first connect the power supply
to the Docking Station).
Connect the RS232/Charging Cable or USB/
Charging Cable to the PA962, and then connect
the AC adapter to the cable’s power jack and an
electrical outlet.
Supplying Power to the PA962
3.
Position the battery pack and install the battery
compartment door.
Charging the Main and Backup Batteries for the First Time
It may take up to 16 hours to fully charge the empty backup battery. The first time
charge should be for at least 16 hours to insure a proper charge.
CAUTION:
Operating the PA962 for the first time without the AC adapter,
and without fully charging the backup battery may result in loss of data
stored in RAM memory.
וֹ כּ מּף ףץ٪ّ ٠מּَ ِ ٩٭۶ףוֹ ٭٩ץף ێ ۖ ףףףףףףףףףףף wwwِpdffactoryِcom