VeriFone NURIT 8400 - Manual (Page 29)

S ETUP
Connecting Cables
NURIT 8400 I NSTALLATION G UIDE 29
External Telephone
Connection
You may connect a standard external telephone to a model of the NURIT 8400
that uses the analog telephone network for communications, so you still have
telephone access while the modem is connected to the telephone line.
Connect one end of the RJ11 cable to the PHONE socket at the back of the
NURIT 8400 and the other end to the RJ11 connector on the telephone or fax
machine.
Figure 20 NURIT 8400 External Telephone connection
Ethernet
Connection
Some models of the NURIT 8400 can be connected to a 10BaseT Ethernet Local
Area Network (LAN).
To connect the
NURIT 8400 to an
Ethernet LAN
Connect one end of the Ethernet adapter cable to the ETH port on the back of the
terminal and the other into its corresponding socket.
Figure 21 NURIT 8400 Ethernet Connection
WARNING
When in the vicinity of a gas leak, do not use the NURIT 8400, a standalone
telephone, or a telephone connected to the terminal to report the leak.
NOTE When connecting an external telephone to the terminal, follow these precautions
to ensure proper completion of transactions:
• Cancel the call waiting service for the telephone line to which the
NURIT 8400 is connected. Contact your telephone company for
information.
• Do not initiate a telephone call, send a fax, or lift the handset when the
NURIT 8400 is processing a transaction.
NOTE If you want to connect an external telephone to the NURIT 8400 terminal along
with an analog telephone network connection, you must use a 2-socket RJ11
plug in the modular wall connector.