VeriFone NURIT 8400 - Manual (Page 31)

S ETUP
Connecting Cables
NURIT 8400 I NSTALLATION G UIDE 31
RS232 Connection Both RS232 ports ( COM1 and COM2 ) can be used to connect the NURIT 8400 to
another related device, such as a PC. Connect one end of the RS232 cable to
either the
COM1 or COM2 socket at the back of the terminal and the other end to the
desired related device, such as the PC.
Figure 23 Possible NURIT 8400—RS232 Connections
NOTE
The RS232 cable is not included with the NURIT 8400. A standard RS232 cable
may be used with the unit.
NOTE The COM1 and PIN PAD port both provide a power supply for peripheral devices.
Both currents are able to supply a sum of up to 500 mA, in total. (Both currents
should total under 500 mA.)
The power supply in the COM1 and PIN PAD is 6 VDC (minimum) to 9 VDC
(maximum).
The COM2 port does not provide power under any configuration.