VeriFone NURIT 8400 - Manual (Page 30)

S ETUP
Connecting Cables
30 NURIT 8400 I NSTALLATION G UIDE
External PIN Pad
Connection
The NURIT 8400 can connect to an external PIN pad.
Connect one end of the connector cable (supplied with the terminal) to the PIN PAD
port on the back of the terminal and the other into its corresponding socket.
.
Figure 22 NURIT 8400 PIN Pad Connection
CAUTION You may use the following ports for a PIN pad connection (connections are
model dependent):
• PIN PAD
• COM1 (See RS232 Connection )
• COM2 (Only with external power supply for PIN pad. See RS232 Connection )
NOTE The COM1 and PIN PAD port both provide a power supply for peripheral devices.
Both currents are able to supply a sum of up to 500 mA, in total. (Both currents
should total under 500 mA.)
The power supply in the COM1 and PIN PAD is 6 VDC (minimum) to 9 VDC
(maximum).