VeriFone NURIT 8400 - Manual (Page 33)

S ETUP
Using the Smart Card Reader
NURIT 8400 I NSTALLATION G UIDE 33
Using the Smart
Card Reader
The EMV-compatible smart card reader is located at the bottom end of the NURIT
8400 terminal. Use the smart card reader with a smart card.
To use the smart card
reader
1 Hold the smart card horizontally, with the metal chip facing up and at the edge
of the card nearest to the smart card reader slot.
2 Insert the card all the way into the smart card reader slot, until it snaps in.
Figure 25 Inserting Smart Card
3 Remove the card when prompted by the POS terminal, depending on the
specific application being used.
NOTE For guidance, a pictogram near the card slot indicates how to insert the smart
card into the smart card reader. In addition, insertion direction arrows may be
engraved or inscribed on the smart card.