Vanguard Managed Solutions Vanguard 6500 PLUS - Manual (Page 81)

Installation 2-73
DSU DIM Installation
Operation of this equipment in a residential area is likely to cause interference in
which case the user will be required to take adequate measures to correct the
interference.
This product was verified under test conditions that include use of shielded DTE
cable(s). Leased line cables with 1.5 turns through a ferrite cylinder were also used.
Use of different cables will invalidate verification and increase the risk of causing
interference to radio and TV reception.
You can obtain the proper cables from VanguardMS.
If this equipment causes interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorienting the receiving antenna
• Relocating the equipment with respect to the receiver
• Moving the equipment away from the receiver
• Plugging the equipment into a different outlet so that the equipment and
receiver are on different circuits
If necessary, you should consult the dealer or an experienced radio/television
technician for additional circuits.
You may find the following booklet prepared by the FCC helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is available from
the U.S. Government Printing Office, Washington, D.C. 20402, Stock No.
004-000-00345-4.
If Problems Arise
Installing the DSU
DIM If any of your equipment is not operating correctly, immediately remove it from the
telephone line before it harms your network. If the telephone company notes the
problem, they may temporarily disconnect your service. They will notify you in
advance of the disconnection, when possible. If advance is not feasible, you will be
notified as soon as possible. When you are notified, you will be given the chance to
correct the problem and be informed of your right to file a complaint with the FCC.
If your 6500 IFX needs repairs, they should be performed by VanguardMS or an
authorized representative of VanguardMS. For information, contact the VanguardMS
Customer Support Center at 1-800-544-0062.