Vanguard Managed Solutions Vanguard 6500 PLUS - Manual (Page 91)

Cables A-1
Appendix A
Cables
Introduction The tables in this appendix describe the pinouts for ports on Standalone, Modulus
8/18, and Modulus 9/21 enclosures and include this information:
• Standalone, Modulus 8/18, and 9/21 enclosures: EIA 232-D signals with V.24
DIMs on the processor card
• Modulus 9/21 enclosures: V.35/V.36 signals with V.35/V.36 DIMs on the
processor card
• Modulus 9/21 enclosures: V.11 signals with X.21 DIMs on the processor card
• Standalone and Modulus 8/18 enclosures: V.35/V.36 signals with V.35/V.36
DIMs on the processor card
• Standalone and Modulus 8/18 enclosures: V.11 signals with X.21 DIMs on the
processor card
• Standalone and Modulus 8/18 enclosures: EIA 232-D crossover cable
• Token Ring LAN STP (shielded twisted pair) cable pinouts
• Token Ring LAN UTP (unshielded twisted pair) cable pinouts
The descriptions of EIA 232 pinouts apply to all 6500 cards. However, V.35, V.36,
and X.21 interfaces are available only on the first two ports on a 6500
PLUS processor
card. For example, in a multi-processor node, Ports 1 and 2 on the first processor
card could be configured (with the DIMs and jumpers) for V.35, and Ports 7 and 8 on
the second processor card could also be configured (with the DIMs and jumpers)
for V.35.
The arrows in the tables indicate the direction of the port signal, as follow:
<-------------- indicates an input signal to the port
---------------> indicates an output signal from the port