Visioneer MX 200 - Manual (Page 13)

C AMERA C OMPONENTS 7
6. Mode Dial—Selects the cameras mode: Video, Preset,
Snapshot, Playback, Set Up, and PC.
7. USB, Video Out, and AC Adapter Ports—The USB
(Universal Serial Bus) port is used to connect the camera to a
computer. The Video Out port connects the camera to a
television. The AC adapter port connects an AC adapter to an
external source of electricity.
8. Hand Strap Loop—Used to connect the camera to the
supplied hand strap.
9. Up Button—Cycles through menu items in Set Up mode and
photos in Playback mode.
10. Down Button—Cycles through menu items in Set Up mode
and photos in Playback mode.
11. Flash/Copy—In Snapshot mode, cycles through flash setting
options. In Playback mode, copies pictures from the internal
to the external menu, and vice versa.
12. WB/Delete—In Snapshot mode, cycles through white balance
setting options. In Playback mode, deletes selected photos.
13. Display—Cycles through display options for the LCD. Also
used to select items when in Set Up mode.
14. LCD—Based on the selected mode, the LCD is used to
preview photos, playback existing photos, view messages, and
configure camera settings.