Visioneer MX 200 - Manual (Page 15)

G ETTING R EADY TO T AKE P ICTURES 9
G
ETTING
R
EADY TO
T
AKE
P
ICTURES
Complete the following installation and setup steps to prepare your
camera for taking pictures.
I NSTALL THE M EMORY C ARD AND B ATTERIES
To install the memory card:
1. Open the battery/memory card cover.
■ Press on the cover and slide it in the direction of the arrow,
toward the outside edge of the camera.
■ Lift the cover to its fully open position.
2. Insert the SmartMedia TM memory card (purchased separately)
with the notched corner facing the outside edge of the camera.
Note: If you prefer to store your photos on the camera’s internal
memory, you do not need to install a memory card.
Notch