Visioneer MX 200 - Manual (Page 32)

26 V ISIONEER MX 200 D IGITAL C AMERA U SER ’ S G UIDE
1. From the Set Up menu, press the Up or Down buttons
to select Quality, and then press the Display button.
2. On the Quality screen, press the Up or Down buttons
to select the desired picture quality, and then press the Display
button.
Buzzer: This option is used to set the camera to beep when you
push its buttons or rotate the Mode dial.
1. From the Set Up menu, press the Up or Down buttons
to select Buzzer, and then press the Display button.
2. On the Buzzer screen, press the Up or Down buttons
to select On or Off, and then press the Display button.