Visioneer MX 200 - Manual (Page 58)

52 V ISIONEER MX 200 D IGITAL C AMERA U SER ’ S G UIDE
Problem: The flash doesn’t work.
Problem: When turned on, the LED flashes green, red,
orange, and green. Then the camera crashes.
Problem: The Digital Camera Utility will not run when the
camera is set to PC mode.
Possible Cause Solution
The flash is not turned on. Ensure that the flash is set to the
Automatic or Always On
options. Refer to page 33.
The batteries are weak and the
flash is unable to recharge. Turn the camera off and wait a
few seconds before turning it
back on. If this doesn’t work,
replace the batteries.
Possible Cause Solution
The SmartMedia card is not
inserted correctly. Turn the camera off. Remove and
reinstall the SmartMedia card,
see page 9 for details.
Possible Cause Solution
The computer monitor’s display
is set to less than 24 bit color
depth. Right-click your desktop and
select Properties. On the Display
Properties window, click the
Settings tab. Set the Colors value
to True Color (24 bit) or higher.