Visioneer MX 200 - Manual (Page 57)

T ROUBLESHOOTING 51
T
ROUBLESHOOTING
If you are having problems using your camera, refer to the
troubleshooting procedures in this section. If you are still having
difficulties, refer to the technical support section in this guide on
page 51. Also, visit our web site at www.visioneer.com for
additional support information.
Problem: The camera has no power.
Problem: The camera won’t take a picture.
Possible Cause Solution
The camera is turned off. Press the On/Off button to turn
the camera on.
The batteries are discharged. Replace the batteries.
The batteries are inserted
incorrectly. Check the battery orientation.
See page 9 for details.
Possible Cause Solution
The green camera-ready LED
is not on. Wait until the light stops flashing
and is green.
The camera is connected to a
computer, causing the buttons
not to function. Disconnect the camera from the
computer.