Visioneer MX 200 - Manual (Page 30)

24 V ISIONEER MX 200 D IGITAL C AMERA U SER ’ S G UIDE
S ET U P M ODE
Set Up mode is used to configure your camera. When you turn the
Mode dial to Set Up, the following menu displays on the LCD.
Each menu option is described below.
Delete All: This option is used to delete all images from the
internal memory or the SmartMedia card. To determine, or
change, the current memory type, refer to “Memory Type” on
page 29.
1. From the Set Up menu, press the Up or Down buttons
to select Delete All, and then press the Display button.
2. On the Delete All screen, press the Up or Down
buttons to select No or Yes, and then press the Display button.
Format: This option is used to erase and reformat the SmartMedia
card. You should occasionally format the SmartMedia card to
ensure it functions optimally.
Note: To exit a Set Up mode selection without saving changes,
press the Delete button.