Visioneer MX 200 - Manual (Page 46)

40 V ISIONEER MX 200 D IGITAL C AMERA U SER ’ S G UIDE
6. When installation is finished, turn off the camera.
To install your camera for use as a PC camera:
1. With the camera connected to your PC, set the camera’s Mode
dial to PC.
2. Turn on the camera.
3. Your computer detects the connection to the camera and
initiates installation of the new hardware.
■ Depending on your Windows operating system, the
installation will proceed automatically or you will be asked
to follow the instructions in a new hardware wizard.
4. When installation is finished, turn off the camera.
Note: If your computer is running the Windows XP operating
system, you may see a screen indicating that the camera has not
passed Windows Logo testing. If this screen appears, click
Continue Anyway. The function of your camera is not affected.
Note: If your computer is running the Windows XP operating
system, you may see a screen indicating that the camera has not
passed Windows Logo testing. If this screen appears, click
Continue Anyway. The function of your camera is not affected.