Vivotek PZ7112 - Manual (Page 119)

VIVOTEK
User's Manual - 119
\r\n
<multipart encoded form data>
Server will accept the file named <file name> to upgrade the firmware and return with <return page> if indicated.
Camera Control
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/camctrl.cgi?[channel=<value>][&camid=<value>]｛ [&move=<value>] or
[&focus=<value>] or [&iris=<value>] or [&speedpan=<value>] or [&speedtilt=<value>] or [&speedzoom=<value>] or
[&speedapp=<value>] or [&auto=<value>] or [&zoom=<value>] or [&zooming=<value>] or
[&vx=<value>&vy=<value>&vs=<value>] ｝[&return=<return page>]
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of video source.
camid 0,<positive integer> Camera ID.
home Move to camera to home position.
up Move camera up.
down Move camera down.
left Move camera left.
move
right Move camera right.
speedpan -5 ~ 5 Set the pan speed.
speedtilt -5 ~ 5 Set the tilt speed.
speedzoom -5 ~ 5 Set the zoom speed.
speedapp 1 ~ 5 Set the auto pan/patrol speed.
pan Auto pan.
patrol Auto patrol.
auto
stop Stop camera.
wide Zoom larger view with current speed.
tele Zoom further with current speed.
zoom
stop Stop zoom.
wide Zoom without stopping for larger view with current speed. zooming
tele Zoom without stopping for further view with current speed.
vx <integer , excluding 0>
vy <integer>
The slope of movement = vy/vx, used for joystick control.