Vivotek PZ7112 User Manual
Page 40
VIVOTEK
40 - User's Manual
Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way audio
function, make sure the video mode is set to “MPEG-4” on the Audio and Video Settings page and the
media option is set to “Video and Audio” on the Client Settings page� Please refer to Client Settings on
page 21 and Audio and Video Settings on page 51�
Click
to enable audio transmission to the Network Camera; click
to adjust the volume of
microphone; click
to turn off the audio� To stop talking, click
again�
FTP
The FTP server allows the user to save recorded video clips� You can utilize VIVOTEK Installation Wizard
2 to upgrade the firmware via FTP server. By default, the FTP port is set to 21. It also can be assigned to
another port number between 1025 and 65535�
Audio transmitted from operators
Audio transmitted to operators
America
Taiwan
Audio is being transmitted to the Network Camera
Mute
Mic Volume
Talk Button