Vivotek PZ7112 - Manual (Page 53)

VIVOTEK
User's Manual - 53
■ Saturation: Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0.
■ Sharpness: Adjust the image sharpness level, which ranges from -3 to +3. The default value is set to +3.
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes� When completed with the settings on this page, click Save to enable the
setting and click Close to exit the page�
CCD Adjustment
Advanced Mode
Click CCD settings to open the CCD Adjustment page� On this page, you can set the Auto electronic
shutter (AES), Auto tracking white balance, White balance control, Low lux mode, and BLC settings�
Auto electronic shutter (AES): The default iris setting of the CCD is fixed mode, and the AES option
will be 1/50 (1/60)� There are several options for AES: 1/50 (1/60), 1/100 (1/120), 1/250, 1/500, 1/1000,
1/200, and 1/4000� Faster electronic shutter would enable the Network Camera to capture fast-moving
objects more clearly. Once the shutter is selected as Auto, the iris of the CCD will become fixed.
Auto tracking white balance: This option is usually selected when the Network Camera is placed in
outdoor environments� Adjusting the 0~8 level would help the Network Camera capturing video with
correct colors� The default value is set to 4�
White balance control: Select this option will disable Auto tracking white balance� This option is usually
selected when the Network Camera is placed in indoor environments� The administrator can adjust the
value for best color temperature: 3200k, 4000k, 4800k, 5600k, 6400k, 7200k, 8000k�
Low lux mode: Select this option would enable the Network Camera to capture clear images in poor
illuminative environments�
Auto switch to B/W in low lux mode: Select it to enable the Network Camera to automatically switch to B/
W in low lux mode�