Vivotek PZ7112 - Manual (Page 32)

VIVOTEK
32 - User's Manual
Network
This section explains how to configure a wired network connection for the Network Camera.
Network Type
LAN
Select this option when the Network Camera is deployed on a local area network (LAN) and is intended
to be accessed by local computers� The default setting for the Network Type is LAN� Rememer to click
Save when you complete the Network setting�
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by
the DHCP server each time the camera is connected to the LAN�
Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera�
1� You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the Network
Camera on LAN� Please refer to Software Installation on page 11 for details�
2� Enter the static IP, Subnet mask, Default router, and Primary DNS provided by your ISP�
Enable UPnP presentation: Select this option to enable UPnP TM presentation for your Network Camera
so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras
will be listed in My Network Places� You can click the shortcut to link to the web browser� Currently,
UPnP TM is supported by Windows XP or later. Note that to utilize this feature, please make sure the
UPnP TM component is installed on your computer�