Vivotek PZ7112 - Manual (Page 89)

VIVOTEK
User's Manual - 89
http://<servername>/cgi-bin/ operator /getparam.cgi?[<parameter>]
[&<parameter>…]
http://<servername>/cgi-bin/ admin /getparam.cgi?[<parameter>]
[&<parameter>…]
Where the <parameter> should be <group>[_<name>] or <group>[.<name>]. If you do not specify any parameters, all
the parameters on the server will be returned. If you specify only <group>, the parameters of the related group will be
returned.
When querying parameter values, the current parameter values are returned.
A successful control request returns parameter pairs as follows:
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
<parameter>=<value>\r\n
[<parameter pair>]
<length> is the actual length of content.
Example: Request IP address and its response
Request:
http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n
Set Server Parameter Values
Note: The access right depends on the URL directory.
Method: GET/POST