Vidikron Vision 12 - Manual (Page 20)

Controls and Functions
10 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PRE
L
IMINAR
Y
1. ON / OFF
Press to turn the projector on or off.
2. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
3. Source Selection Buttons:
VIDEO
Press to switch to the Composite video input.
COMP 1 (Component 1)
Press to switch to the Component 1 (480i/576i/720p/1080i) video input.
RGB HD
Press to switch to the RGB HD input.
S-VID 1 (S-Video)
Press to switch to the S-Video input.
COMP 2 (Component 2)
Press to switch to the Component 2 (480i/576i/720p/1080i) video input.
DVI
Press to switch to the Digital Video (HDMI) input.
4. Aspect Ratio Selection Buttons:
ANA (Anamorphic)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4X3 (Standard 4:3)
Scales the input signal to fit 4:3 display mode in the center of the screen.
L-BOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 4:3 screen.
I-WIDE (IntelliWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material on a 1.78:1 (16:9) screen. The upper and lower
portions are masked.
C-FILL (CinemaFill)
Stretches a 2.35 image vertically in both directions to fill a 16:9 screen.
5. DEF
Press to restore factory-default settings for the current source.
6. ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
7. ENTER
Press to select a highlighted menu item or confirm a changed setting.
8. MENU
Press this button to access the on-screen display (OSD) controls.