3 changing the osd language, 4 adjusting the picture orientation, Changing the osd language – Vidikron Vision 12 User Manual
Page 40: Adjusting the picture orientation, Pre l iminar y
30
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PRE
L
IMINAR
Y
4.3
Changing the OSD
Language
The Vision 10/12 OSD language is initially set to English, but can also display the menus in
French, Italian, German or Spanish. To change the OSD language:
1.
Press MENU.
2.
Select Installation from the Main Menu.
3.
Select Language from the Installation Menu.
4.
Press
or
to select the desired language. The change takes effect immediately.
4.4
Adjusting the Picture
Orientation
By default, the Vision 10/12 is configured for a “floor/front” installation, in which the
projector is installed upright and in front of the screen. If it is installed behind the screen
and/or mounted on a ceiling, you must change the picture orientation. To do this:
1.
Press MENU.
2.
Select Installation from the Main Menu.
3.
Select Picture Configuration from the Installation Menu.
4.
Choose Floor Rear, Ceiling Front or Ceiling Rear, to match the installation method.