Notes on remote control operation, Figure 3-1 . available range of the remote control, 1. available range of the remote control – Vidikron Vision 12 User Manual
Page 24: Pre l iminar y
14
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PRE
L
IMINAR
Y
Notes on Remote Control
Operation
The remote control can be used to control the projector within the ranges shown in Figure
3-1.
Figure 3-1. Available Range of the Remote Control
• For best results, hold the remote control within 23 feet (7m) of the back or top sensor and
aligned within 30°.
• Do not drop the remote control or expose it to moisture or high temperature.
• The remote control may malfunction under a fluorescent lamp. If that occurs, move the
projector away from the fluorescent lamp.
• Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver on the projector.
• If the effective range of the remote control decreases, or it stops working, replace the
batteries with new ones.
• Ambient conditions may possibly impede the operation of the remote control. If this
happens, point the remote control at the projector, and repeat the operation.
➤
The signal from the remote control can be reflected by the screen.
30°
45°
23'(7 m)
45°
30°
23'(7 m)
Note