Vidikron Vision 12 - Manual (Page 67)

Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 57
PRE
L
IMINAR
Y
7.1
Vision 10/12 Specifications Table 7-1 lists the Vision 10/12 specifications.
7
Specifications
Table 7-1. Vision 10/12 Specifications
Projector Type: Digital Light Processing (DLP), single-chip DMD
Native Resolution: Vision Model 10: 1024 x 576 (16:9)
Vision Model 12: 1280 x 720 (16:9)
Aspect Ratios: 4:3, Letterbox, 16:9 Anamorphic, IntelliWide, Cinema,
Cinema Fill
Video Standards: NTSC, PAL, SECAM
Scan Frequency: Horizontal: 15 to 80 kHz
Vertical: 43 to 100 Hz
Picture Size (16:9 Screen): Recommended Width: 72 to 96 in.
Maximum Width: 150 in.
Throw Distance
(Factor x Screen Width):
Vision Model 10:
Minimum: Screen Width x 1.40
Maximum: Screen Width x 1.60
Vision Model 12:
Minimum: Screen Width x 1.42
Maximum: Screen Width x 1.65
Horizontal Offset: 8% of screen width left or right
Vertical Offset – Vision Model 10: Ceiling-mounted --
60% of screen height below;
40% of screen height above
Floor-mounted --
40% of screen height below;
60% of screen height above
Vertical Offset – Vision Model 12: Ceiling-mounted --
63% of screen height below;
46% of screen height above
Floor-mounted --
46% of screen height below;
63% of screen height above
Lamp: 250 Watts
Estimated Lamp Life: 2000 hours
Source Inputs: (1) Composite; (1) S-Video; (2) RCA Component (YPbPr); (1)
VGA; (1) HDMI 1.2 with HDCP
Control Options: - Discrete infrared remote
- Serial commands via RS-232
RS-232 Communication
Parameters: 9600 bps, no parity, 8 data bits, 1 stop bit, no flow control