Viper Model 480XV - Manual (Page 10)

11 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
system maintenance
This system needs no specific maintenance beyond remote
control battery replacement. The LCD remote is powered by a
1.5V
AAA battery.
The Battery Level indicator has four level indicators that serve as
a visual indication of battery charge. When the battery reaches a
low charge level that requires replacement, the remote control
will generate a single notification chirp, and the Battery Level
indicator will flash continuously.
Battery Replacement
Gently pull the end of the battery door away from the top of the
remote control then slide the door up to expose the battery and
remove the expired battery. Place the new battery into the remote
EMPTY REPLACE
FULL
➜
nnoottee:: Making changes to the existing system will invalidate the certifi-
cate of installation.
nnoottee:: The Installation Certificate must be completed by your installer at
the authorised dealer. Other than the remote controls, this system has no
user-serviceable parts. Your authorised dealer can correct any system
wiring problems and, if needed, can return any malfunctioning compo-
nent to Directed Electronics for repair/replacement under the terms of
the Limited Lifetime Warranty printed at the beginning of this guide.
nnoottee:: Your system MUST be installed by an Authorised dealer in accor-
dance with the instructions we supply them. The Viper 460XV system
is designed to be installed in any petrol or common rail diesel vehicle
with a 12-volt battery.