Viper Model 480XV - Manual (Page 33)

34 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
table of zones
The zone number is the number of LED flashes used by the
system to identify that input. The standard input assignments
are listed below, along with spaces to write in any optional
sensors or switches you have had installed.
interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming
diagnostics. If you receive a Bypass notification when arming or
a Tamper Alert notification when disarming, look at the LED.
Active or triggered zones will be indicated by a pattern of flashes
by the LED.
➜
Zone - Number Dealer-Installed
of LED Flashes Description Options
1 Boot trigger
2 Ultrasonic Sensors
3 Door switch trigger
4 Optional sensor input 1
5 Ignition trigger
6 Bonnet trigger
7 Optional sensor input 2
➜