Viper Model 480XV - Manual (Page 28)

29 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
3. Turn the ignition key OFF.
4. Turn the ignition key to the ON position.
5. Enter the second number in your PIN (press the Valet switch
three times).
6. Turn the ignition key OFF.
7. Turn the ignition key to the ON position
8. Enter the third number in your PIN (press the Valet switch
four times).
9. Turn the ignition key OFF.
10. Turn the ignition key to the ON position.
11. Enter the last number in your PIN (press the Valet switch
five times).
12. Turn the ignition key OFF. If you have entered the correct
code you will hear two chirps. Should you hear five rapid
chirps, the correct code has not been entered. Begin entering
your PIN from the beginning.
interior light control
security only
The interior light activates for 30-seconds after the system is
disarmed.
Ignition controlled
The interior light activates for 30-seconds after the ignition is
turned Off.
➜